Insignia NS-2BRDVD - Manual (Page 9)

7
Insignia NS-2BRDVD Blu-ray DVD Player
www.insignia-products.com
Connecting a standard AV TV
A standard AV connection provides a good video
connection.
To connect a standard AV TV:
•
Connect a standard AV cable (provided) to
the VIDEO OUT and L and R AUDIO OUT
jacks on the back of your player, then connect
the other end of the cable to the
corresponding AV IN jacks on the standard
TV.
Using your player
All actions in this guide are based on using the
remote control unless otherwise indicated.
Playable discs
Region codes
Blu-ray Discs and DVDs have region codes to
help prevent illegal distribution of discs. If the
disc’s region code does not match your player’s
region code, the disc will not play.
Your player’s region code is displayed on the
back of your player. The disc’s region code is
displayed on the disc or disc packaging.
Turning your player on or putting it into
standby mode
To turn your player on or put it into standby
mode:
1 Plug the power cord into a power outlet.
2 Make sure that the TV is turned on.
3 Press STANDBY/ON.
Playing a disc
To play a disc:
1 Turn on the TV, then select the input setting
on the TV that matches the connection
method you used to connect your player.
2 Press OPEN/CLOSE on the front of your
player or OPEN/CLOSE on the remote
control to open the disc tray.
3 Place a disc on the tray with the label facing
up, then press OPEN/CLOSE to close the
tray. It may take a few seconds for the disc to
load.
4 If the disc does not start playing
automatically, press PLAY/PAUSE.
5 If a Blu-ray Disc or DVD menu opens, press
or to select PLAY/PAUSE, then
press ENTER.
6 To eject the disc, press OPEN/CLOSE.
Disc type Logo Disc type Logo
Blu-ray Disc DVD-R
DVD-video
(DVD-ROM Audio CDs
(CDDA)
DVD-RAM DTS-CD
DVD-RW MP3/WMA/
JPEG/Data CD
Notes
• Writeable DVDs (DVD-RAM, DVD-RW, DVD-R)
must be finalized (VR mode only).
• Your player supports discs that are compatible
with DVD-RAM Standard Version 2.0.
• Playback may not work for some types of discs,
or when specific operations, such as changing
the angle or aspect ratio, are being performed.
Information about the discs is on the disc or
disc packaging.
• Do not let the disc become dirty or scratched.
Fingerprints, dirt, dust, scratches, or deposits
of cigarette smoke on the recording surface
may make it impossible to use the disc for
playback.
• Your player can play CD-Rs, CD-RWs,
DVD-RAMs, DVD-RWs, and DVD-Rs recorded
with UDF or ISO9660 format.
• Your player can play MP3 files. MP3 files must
have an .mp3 file extension and WMA files
must have a .wmp file extension, or your player
may not play them correctly.
• High bit-rate or variable bit-rate .mp3 and .wma
files may not play back correctly.
• JPEG picture files must have a .jpeg or .jpg file
extension, or your player may not play them
correctly.
Back of player
AV Cable
Note
When your player is in standby mode, power is still
entering your player. To disconnect power, unplug
the power cord.
Note
Your player will enter screen saver mode (black
screen) after five minutes if:
•
The disc has been ejected or there is no disc in
the tray.
• If you pause playback while playing an MP3,
CD, WMA, DVD, JPEG, or Blu-ray disc.
Press any button on the remote control or the front
of your player to bring your player out of screen
saver mode.