Insignia NS-2BRDVD - Manual (Page 16)

14
Insignia NS-2BRDVD Blu-ray DVD Player
www.insignia-products.com
5 Press to save your selection and return to
the previous menu level.
Or
Press SETUP to close the setup menu.
Turning Film Mode on or off
Movies are recorded at a rate of 24 progressive
frames (pictures) per second. Many movies
recorded on Blu-ray discs are recorded at the 24
progressive frames per second rate.
Not all TVs can display 24 progressive frames
per second. In this case you need to turn off the
Film Mode option.
To turn Film Mode on or off:
1 Press SETUP. The setup menu opens.
2 Press or to select a Display, then press
to move to the list of options.
3 Press or to select Film Mode, then
press .
4 Press or to select Off or On.
5 Press to save your selection and return to
the previous menu level.
Or
Press SETUP to close the setup menu.
Adjusting the digital audio output
To the digital audio output:
1 Press SETUP. The setup menu opens.
2 Press or to select Audio, then press to
move to the list of options.
3 Press or to select Digital Output, then
press to move to the list of options.
4 Press or to select a option. You can
select:
• PCM—Sends mixed digital audio over
HDMI in 7.1CH PCM (if supported by
HDMI device) and SPDIF in two-channel
PCM format.
• Bitstream HD—Sends the bitstream from
the disc over HDMI and SPDIF using
highest quality possible. HDMI has higher
quality capabilities with advanced audio
codecs like TrueHD and DTS-HD. Blu-ray
Disc audio is limited to the soundtrack for
the main movie and does not send PiP
audio or audio effects.
Note
• Setting your player to a resolution that the TV
does not support may cause unpredictable
results.
• Only the HDMI jack supports 1080p video
output at any frame rate.
• If the TV is connected to the component jacks,
video output is limited to 1080i.
• If a device is connected to the HDMI jack, the
component output is limited to 480/576i.
Setup Menu
Language
Display
Audio
Parental
System
Audio
Subtitle
Menu
OSD Auto
None
Auto
English
Setup Menu
Language
Display
Audio
Parental
System
TV Aspect
Resolution
Film Mode Off
On
Film Mode should be used
for movie(24p) source material
Note
Only the HDMI jack can support 1080p video
output. The component jacks are limited to 1080i
video output, regardless of the Film Mode setting.
Setup Menu
Language
Display
Audio
Parental
System
Audio
Subtitle
Menu
OSD Auto
None
Auto
English
Setup Menu
Language
Display
Audio
Parental
System
PCM
Bitstream HD
Bitstream Legacy
Bitstream mixed
Digital Output Settings
Digital Output
PCM Downsampling
Dynamic Range Control
Dialogue Normalization