Insignia NS-2BRDVD - Manual (Page 5)

3
Insignia NS-2BRDVD Blu-ray DVD Player
www.insignia-products.com
Features
• Full, high-definition video playback at up to
1080p resolution for an amazing viewing
experience
• Upconversion of standard-definition DVDs for
enhanced picture quality at up to 1080p over
an HDMI connection.
• Rich multi-channel surround sound
• Easy HDTV connection using a single HDMI
cable (cable not included)
• Multiple outputs for connecting your home
theater system or amplifier
• PIP functionality that lets you display primary
and secondary video at the same time (if
available on the Blu-ray Disc)
• Pop-up menu display without interrupting
playback (if available on the Blu-ray Disc)
• HDMI 1080p output (Blu-ray Disc only) that
provides smooth playback of video with a
frame rate of 60 frames per second (TV must
be connected with an HDMI cable and be
compatible with 1080p 60 frame).
Package contents
• Blu-ray DVD player
• Remote control
• Batteries AAA (2)
• AV cable
• User Guide
Front
Back
# Component Description
1 Disc tray Insert a disc with the label side up into
this tray. To open or close the tray,
press OPEN/CLOSE.
2 VFD screen Displays status information, such as
playing time or current time.
3 Remote control
sensor Receives signals from the remote
control. Do not block.
4 (open/close) Press to open or close the disc tray.
5
(standby/on)
Press to turn on your player or put
your player is standby mode. When
your player is in standby mode, power
is still entering your player. To
disconnect power, unplug the power
cord.
6 (previous) Press to go to the previous title,
chapter, or track.
7 (stop) Press to stop playback. If you press
this button once then press
,
playback resumes playback from
where it stopped. If you press this
button twice then press
, playback
begins at the beginning of the disc.
8 (next) Press to go to the next title, chapter, or
track.
9 (play/pause) Press to start or pause playback.
Component Description
1 Power cord Plug this cord into a power outlet.
2 Y, CB/PB, CR/PR
VIDEO OUT
(component) Connect a component TV to these
jacks.
3 VIDEO OUT Connect a standard AV TV to this jack.
4 L/R AUDIO OUT Connect the audio for the TV you
connected to the Y, Cb/Pb, and Cr/Pr
jacks or to the VIDEO OUT jack to these
jacks. You can connect the audio for a
component TV to a sound system
instead of to the TV.
5 COAXIAL DIGITAL
AUDIO OUT Connect a sound system that has a
coaxial audio jack to this jack.
6 OPTICAL DIGITAL
AUDIO OUT Connect a sound system that has an
optical audio jack to this jack.
7 HDMI Connect an HDMI device, such as a TV,
to this jack. The HDMI cable carries
both video and sound. If you connect a
device to this jack, you do not need to
make any audio connections.
8 ETHERNET Reserved for future BD live upgrade.
Do not connect a device to this jack.
9 USB Reserved for future BD live upgrade.
Do not connect a device to this jack.
# Component Description