Icom IC-M505 - Manual (Page 56)

50
OTHER FUNCTIONS
7
■ Intercom operation
The optional Intercom function allows you to talk to the deck
from the cabin. The optional COMMANDMIC III™ is required
for Intercom operation.
Connect an optional command microphone as described on
p. 63.
• Transmitting is impossible during Intercom operation.
• The received signal is muted during Intercom operation.
q Push [IC] to enter Intercom mode.
• The optional command microphone power is automatically
turned ON, even if the power is OFF.
w Push and hold [IC] for 1 sec. again to call up the optional
command microphone side.
• The transceiver and the optional command microphone emit call
beeps.
e Push and hold [PTT] and speak at a normal voice level
into the microphone.
• “T TA AL LK K” or “L LI IS ST TE EN N”* appears on the caller or listener function
display.
• To adjust the IC-M505’s speaker output level, rotate [VOL].
• To adjust the HM-162E’s speaker output level, rotate [SELEC-
TOR] after pushing [VOL] on the HM-162E.
r After releasing [PTT] you can hear the response through
the speaker.
t To return to the normal operation, push [IC] momentarily.
• [16•C] and [DISTRESS] keys are also available.
INTERCOM INTERCOM
TALK
TALK
IC-M505 (caller)
INTERCOM INTERCOM
LISTEN
LISTEN
HM-162E (listener)
INTERCOM INTERCOM
IC-M505/HM-162E
Push