Icom IC-M505 - Manual (Page 16)

10
3
BASIC OPERATION
■ Channel comments
Memory channels can be labelled with a unique alphanumeric
ID of up to 10 characters.
Capital letters, small letters, 0 to 9, some symbols (/ . –) and
space can be used.
q Select the desired channel.
• Cancel Dualwatch, Tri-watch or Scan in advance.
w While pushing and holding [H/L], push [16•C] to edit the
channel comment.
• A cursor and the first char-
acter start blinking alter-
nately.
e Select the desired charac-
ter by rotating [CHAN-
NEL].
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectively.
r Repeat step e to input all characters.
t Push [CHANNEL•ENTER] to input and set the comment.
• Push [CLR] to cancel.
• The cursor and the character stop blinking.
y Repeat steps q to t to program other channel com-
ments, if desired.
■ Microphone Lock function
The Microphone Lock function electrically locks [Y]/[Z] and
[HI/LO] keys on the supplied microphone. This prevents ac-
cidental channel changes and function access.
➥ While pushing and holding [HI/LO] on the microphone, turn
power ON to toggle the Lock function ON and OFF.
■ Display backlight
The function display and keys can be backlit for better visibil-
ity under low light conditions.
➥ While pushing and holding [H/L], rotate [CHANNEL] to ad-
just the brightness of the LCD and key backlight.
• The backlight is adjustable in 7 levels and OFF.
[HI/LO]
[Y]/[Z]
25W 25W INT INT
TAG TAG
34 34°34.506N 34.506N
123 123°23.236W 23.236W
UTC UTC 12 12:00 :00PLEASURE__ PLEASURE__