Icom IC-M505 - Manual (Page 33)

27
6
DSC OPERATION
6
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or “M Ma an nu ua al l I In np pu ut t,” push [CHAN-
NEL•ENTER].
• The ID code for the individual call can be set in advance. (p. 17)
• When “M
Ma an nu ua al l I In np pu ut t” is selected, set the 9-digit MMSI
number for the individual you wish to call by rotating [CHAN-
NEL].
1st digit must not be ‘0’.
r Rotate [CHANNEL] to select a desired intership channel,
push [CHANNEL•ENTER].
• Intership channels are already preset into the transceiver in rec-
ommended order.
t Push [CHANNEL•ENTER] to transmit the individual call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
--DSC Menu--
Individual Call
Transmitting
--DSC Menu--
Select Intership CH
˘08
69
77
06
--DSC Menu--
Individual Call Ready
--DSC Menu--
Select Address
Manual Input
John
˘Paul
George
Michael