Impex IGS-5683 - Manual (Page 9)

STEP 3 (See Diagram 3)
A.) Attach the Leg Developer (#11) to the Leg Developer Holder (#5). Secure it with an Axle
(#54), two M10 x 5/8” Allen Bolts (#47), and two
∅
¾” Washers (#39).
B.) Insert two Foam Tubes (#14) halfway through the holes on the Leg Developer. Push four
∅
4” Foam Rolls (#23) onto the Tubes from both ends.
C.) Attach a Spring Clip (#24) onto the weight post on the Leg Developer.
D.) Attach the Arm Curl Pad (#18) to the Arm Curl Stand (#12). Secure it with two M8 x 5/8” Allen
Bolts (#48) and
∅
5/8” Washers (#38).
E.) Insert the Arm Curl Stand into the opening on the Leg Developer Holder. Secure it with a M18
Lock Knob (#26) through a selected hole to obtain the desired height for Arm Curl exercise.
DIAGRAM 3
8