Impex ME-708 - Manual (Page 8)

STEP 2 (See Diagram 2)
A.) Note: In order to hold the Front Post (#4) while connecting the cables and wires,
extra help may be needed.
B.) Attach the Front Post (#4) to the Main Frame (#1). Connect the Middle Computer Wire
(#21) from the bottom of Front Post to the Lower Computer Wire (#22) from the main
Fame.
C.) Pull the tension connector from the Upper Tension Cable (#20) and slide in between
the opening on the connector holder on the Lower Tension Cable (#23). Pull the Upper
Tension Cable upward and slide the wire through the slot on the bracket.
D.) Drop down the Upper Tension Cable so the fitting sits firmly on top of the bracket.
E.) Secure the Front Post to the Main Frame with four M8 x 5/8” Allen Bolts (#18) and four
Ø 7/8” Curved Washers (#16).
DIAGRAM 2
7