IOGear Wireless USB Print Server GPSR01U - Manual (Page 62)

SSID: The Service Set ID. This should be set to the
same value as other wireless devices in your
network. (Default: ANY)
Channel Number: The radio channel through which
the Print Server communicates.
Data Transmit Rate: Set the rate of data transmitted
from the Print Server. The lower the data rate, the
longer the transmission distance. (Default: 1,2,5.5,11
MBPS.)
WEP Encryption: Displays the WEP encryption
status.
TCP/IP Status
TCP/IP Status displays the TCP/IP settings of the
wireless printer server.
Wireless Status
Wireless Status displays the wireless settings of the
wireless print server.
Mode: Set the station operation mode to 802.11 Ad-
Hoc for network configurations that do not have an
access point, or to Infrastructure for configurations
with an access point (Infrastructure is the default
setting.)
AP’s MAC Address: Displays the MAC address of the
Print Server.
Web Based Configuration
59