IOGear Wireless USB Print Server GPSR01U - Manual (Page 30)

27
Macintosh Installation
IOGEAR Wireless Print Server Installation in Mac
OSX
1. Open the box the Wireless Print Server came in.
Follow the proper included instructions for hooking it
up to your Printer.
2. After the print server has been plugged in, move
the switch on top of the Wireless Print Server to
enable Ad Hoc mode. Flip the DIP switch to the right
side, the side near to the power connector.
3. Wait a few moments, after enabling Ad Hoc mode,
then select the Airport status icon on the right side
of the menu bar.