IOGear Wireless USB Print Server GPSR01U - Manual (Page 44)

Changing the SSID on the Print Server
To change the SSID on the Print Server, you must
wirelessly connect to the print server in AD-HOC
(Computer-to-Computer) mode while the Print
Server is in a
Diagnostic mode , unplug the unit, flip
the DIP switch to the right side, the side near the
power connector, and plug the unit back.
You need to change the properties of your wireless
card to Ad-Hoc and change the SSID to match the
wireless Print Server’s SSID, WLAN-PS.
1. First, select on the start menu. Right-click on My
Network Places and click on properties.
Changing SSID on Print Server
41