Caution, Do not overload the machine, C. air dry all treated surfaces – Invacare MA90Z User Manual
Page 32
5 MAINTENANCE AND TROUBLESHOOTING
32
•
If blood is not present, remove any soil from the cover with paper towels.
8.
Perform the following steps to clean the mattress cover:
A. Using a clean sponge or paper towel, wipe down the cover surface with a dilute detergent solution of quaternary cleaner disinfectant or
other germicidal detergent solution.
B.
Remove the cover and launder it using the following method:
i.
Place the cover in a washing machine.
ii.
Wash with warm water (below 120°F).
iii. Add detergent and disinfectant according to the manufacturer’s instructions.
iv. Remove excess water.
v.
Set the dryer to the lowest setting (below 120°F).
vi. Dry the cover until it is completely dry.
9.
Perform the following steps to clean the control unit and hose fittings:
A. Wipe all controls, chassis and hose fittings with a quaternary disinfectant solution.
B.
Using a nylon brush, gently clean all crevices as they can harbor microorganisms.
C. Air dry all treated surfaces.
If soiled, the cover should be removed, cleaned and decontaminated.
ƽ
CAUTION
Laundry workers should always wash their hands before working with clean bedding.
DO NOT overload the machine.
DO NOT use chlorine bleach because it may damage the fabric coating.
High air temperatures will damage the fabrics and void the Invacare warranty.