Intel I945P - Manual (Page 46)

BIOS
Page 4-12
4-5 Power Management Setup
Choose the “POWER MANAGEMENT SETUP” in the CMOS SETUP UTILITY to
display the following screen. This menu allows the user to modify the power
management parameters and IRQ signals. In general, these parameters should not be
changed unless it’s absolutely necessary.
Figure 6: Power Management
ACPI Suspend Type
This item allows you to select S1(Power-On-Suspend) or S3(Suspend-To-RAM)
function. When set to “S3(STR)” or “S1&S3” the following two fields become
available.
Options: S1(POS), S3(STR), S1&S3.
POWER ON Function
Enables computer power on by the keypress activity.
Options: Disabled, Any key, Mouse, Both (Any key+Mouse).
PWRON After PWR-Fail
This item enables your computer to automatically restart or return to its last operat-
ing status after power returns from a power failure.
Off:
The system stays off after a power failure.
Former-Sts: The system returns to the state it was in just prior to the power failure.