Icom IC-F60V - Manual (Page 28)

22
3
BASIC OPERATION
■ Recording function
(Depends on the version)
The transceiver has a recording function that records the TX/RX
voice messages. When the specified ID is received, the automatic
recording function activates and records the voice message for a
specified time period.
Or, if the transceiver has [Playback/Rec] assigned to it, manual
recording is also available.
The maximum record length is 480 sec., and the number of record-
able messages depend on the record length. Ask your dealer for
details.
e.g. When the record length is 10 sec., 48 messages are recordable.
Automatic recording:
q When the specified ID is received, the recording function is au-
tomatically activated.
• “ ” blinks.
w While pushing and holding [PTT], speak into the microphone at a
normal voice level.
• The TX voice message is recorded.
e Release [PTT] to receive.
• The RX voice message is recorded.
r The recording operation automatically stops after the following:
the specified time has expired, the recording memory is full,
pushing any key but [PTT], or transmitting a single tone.
• “ ” stops blinking.
• Pushing [Playback/Rec] (if assigned) also stops recording.
Manual recording:
q Push and hold [Playback/Rec] for 1 sec. to activate the recording
function.
• “ ” blinks.
w While pushing and holding [PTT], speak into the microphone at a
normal voice level.
• The TX voice message is recorded.
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 22 (1,1)