Icom IC-F60V - Manual (Page 21)

15
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
■ Call procedure
When your system employs tone signalling (excluding CTCSS and
DTCS), this call procedure may be necessary prior to voice trans-
mission. The tone signalling employed may be a selective calling
system which allows you to call specific station(s) only and prevent
unwanted stations from contacting you.
q Select the desired TX code channel or 2/5-tone code according
to your System Operator’s instructions.
• This may not be necessary depending on programming.
• Refer to pgs.
18 , 19 for selection.
w Push [Call] (assigned to one of the dealer programmable keys).
e After transmitting, the remainder of your communication can be
carried out in the normal fashion.
Selective calling Non-selective calling
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 15 (1,1)