IBM Asynchronous Color Terminals WS525 - Manual (Page 20)

Multiple Sessions
2.2 Using a Terminal Server with TD/SMP
2.2 Using a Terminal Server with TD/SMP
At the Local> prompt, enter the following command:
Local> set port multi enable Return
Continue with your login procedure.
To permanently set a terminal server port to use TD/SMP, type:
Local> define port multi enable Return
2.2.1 Using SSU Host Software
If your WS525 is connected directly to a host computer without a
terminal server, you can still use TD/SMP by running the Session
Support Utility (SSU) on your host computer. On a system that has
SSU software, such as OSF/1 or OpenVMS, enable sessions as follows:
$ SSU ENABLE Return
2.2.2 Opening Another Session
Once TD/SMP is enabled, you can open a new session and switch
between them as follows:
1. Press the
F4
(Session) key on a ANSI-style keyboard; or press
Caps Lock 0
kpd on a PC keyboard.
2. To go directly to a particular session, press
Caps Lock 1
,
2
,
3
or
4
on the numeric keypad. The session number for the current
session is displayed at the lower left of the screen.
2–2 Multiple Sessions