Impex NS-1003U - Manual (Page 8)

C.) Pull the tension connector from the Upper Tension Cable (#20) and slide in between the opening
on the connector on the Lower Tension Cable (#23). Pull the Upper Tension Cable upward and
slide the wire through the slot on the bracket.
D.) Drop down the Upper Tension Cable so the fitting sits firmly on top of the bracket.
E.) Secure the Front Post to the Main Frame with four M8 x 5/8” Allen Bolts (#18) and four Ø 5/8”
Curved Washers (#16).
STEP 3
© IMPEX INC. 7