Impex NS-1003U User Manual
Magnetic-resistance upright bike ns-1003u, Model ns-1003u, Impex
NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Pack
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
NS-1003U
Retain This
Manual for
Reference
110518
ASSEMBLY &
OWNER'S
MANUAL
Magnetic-Resistance
Upright Bike
NS-1003U
IMPEX
®
INC.
2801 S. Towne Ave, Pomona, CA 91766
Tel: (800) 999-8899 Fax: (626) 961-9966
Table of contents
Document Outline
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 6
- EXPLODED DIAGRAM………………………………………………………………. 11
- PARTS LIST...................................................................................................… 12
- OPERATING NOTES………………………………………………………………… 13
- WARRANTY.................................................................................................…. 17
- ORDERING PARTS.....................................................................................….. 17
- A.) Attach the Handle (#5) to the Front Post (#4). Secure it with one Bracket (#30), one M8 x ¾” Allen Bolt (#19), and one T-shaped Lock Knob (#26).
- B.) Connect Upper Computer Wire (#28) from Computer (#6) to the Middle Computer Wire (#21) from Front Post.
- C.) Remove the two M5 x 3/8” Philips Screws (#29) from Computer. Slide the Computer onto the bracket on Front Post. Secure it with the two Screws.
- A.) Remove the three Ø 5/8” Washers (#12), three Ø 5/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14) from the Seat (#8).
- B.) Attach the Seat to the Seat Post (#7). Secure it with three Ø 5/8” Washers (#12), three Ø 5/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14).
- C.) Insert the Seat Post into the opening on Main Frame (#1). Thread the Lock Knob (#11) through the hole on Seat Post to securely lock it at selected height.
- MUSCLE TONING
- WEIGHT LOSS