IOGear GCS1802 - Manual (Page 45)

45
Note: If you enabled Check Firmware Version, the Utility compares the device’s fi rmware level with that of
the upgrade fi les. If it fi nds that the device’s version is higher than the upgrade version, a dialog box
appears informing you of the situation and gives you the option to Continue or Cancel.
If you did not enable Check Firmware Version, the Utility installs the upgrade fi les without checking
whether they are a higher level, or not.
As the Upgrade, proceeds status messages appear in the Status Messages panel, and the progress
toward completion is shown on the Progress bar.
After the upgrade has completed, a screen appears to inform you that the procedure was successful.
Click Finish to close the Firmware Upgrade Utility. After a successful completion, the switch exits
Firmware Upgrade Mode, and reset itself.