IOGear GCS1802 - Manual (Page 21)

21
Port Switching
Port switching begins by tapping the Scroll Lock key twice [Scroll Lock], [Scroll Lock] then entering letters
and numbers for precise control.
To increment the KVM by one port: [Scroll Lock] [Scroll Lock] [Enter]. The console (KVM focus) , audio,
and both peripheral ports increment to the next higher port
Note: Audio and Peripherals switch to the same port as the console regardless of where they were
prior to invocation.
To increment only the audio: [Scroll Lock] [Scroll Lock] [S] [Enter].
To increment only the peripherals: [Scroll Lock] [Scroll Lock] [U] [Enter]
To Switch the focus, audio, and peripherals to a specifi c port: [Scroll Lock] [Scroll Lock] [n] [Enter]
n = the port number you wish to access 1,2,3, or 4
Note: The USB peripheral ports are lock together, they cannot be switched independently.