IOGear GCS1802 - Manual (Page 36)

36
Note: Where entries are required, a Dialog box opens at the bottom of the On Screen Display asking for
an entry i.e. yes / no, or numbers to set an interval time.
Note: Programmable mouse buttons will pass through USB cables, but not PS/2 cables
Screen Blanker
Set Time Out interval 1.
Set the Screen lock to ON (Y, in the dialog box) 2.
Select Password, if no password has been set, [Enter] will allow you to set a password. If a password 3.
has been set type it in fi rst then [Enter]
Type in the (new) password then confi rm by reentering it.
4.
When the password is accepted “Password OK” appears on the display. 5.