IOGear GCS1802 - Manual (Page 24)

24
Auto Scanning:
The KVM’s Auto Scan feature automatically cycles the KVM focus through the computer ports at regular
intervals. This allows you to monitor the computer activity without having to take the trouble of physically
switching ports. Auto Scan skips unused ports. To exit Auto Scan Mode press [Esc] or [Spacebar].
Note: While Auto Scan is in effect, ordinary keyboard and mouse functions are suspended – only Auto
Scan Mode compliant keystrokes can be input. You must exit Auto Scan in order to regain normal
control of the console. The audio and USB ports do not switch, but remain at the port in which Auto
Scan was invoked
Skip Mode
This feature allows switching between computers to monitor them manually. You can dwell on a particular
port for as long or as little as you like as opposed to Auto Scanning, which automatically switches after a
fi xed interval. To invoke Skip, key in the following Hotkey combination: