IOGear GCS1802 - Manual (Page 18)

18
Pushbutton operation (Default method)
1. Press a pushbutton once to bring only the KVM focus to the selected port (2 sec delay in switching).
2. Press a pushbutton twice to bring the audio focus to the selected port (2 sec delay in switching).
3. Press a pushbutton longer than 2 seconds to bring the KVM, Audio and USB focus simultaneously
to the selected port.
4. Press pushbuttons 1 and 2 simultaneously for 2 seconds to start the Auto Scan Mode.
5. Press pushbuttons 3 and 4 simultaneously for 2 seconds to perform a keyboard and mouse reset.
(GCS1804 only) It is equivalent to disconnecting and re connecting the devices.
Note: When changing ports, the On Screen Display appears showing which ports the KVM, Audio, and
USB are connected to ( the default duration is 3 secs).
Manual Operation