IOGear GCS1802 - Manual (Page 37)

37
Default and Alternate manual switch settings
MODE 1 (Default Setting) MODE 2 (Alternate)
Press a pushbutton once to bring only the
KVM focus to the computer attached to its
corresponding port (in 2 secs). Press a pushbutton once to bring the KVM, Audio
and USB focus simultaneously to the computer
attached to its port (2 sec delay).
Press a pushbutton twice to bring the
audio focus to the computer attached to its
corresponding port (in 2 secs). Press a pushbutton twice to bring the Audio focus to
the computer attached to its corresponding port (2
sec delay).
Press a pushbutton for longer than 2 seconds
to bring the KVM, Audio and USB focus
simultaneously to the computer attached to
its corresponding port. Press a pushbutton longer than 2 seconds to bring
only the KVM focus to the computer attached to its
corresponding port.
Press pushbuttons 1 and 2 simultaneously for
2 seconds to start the Auto Scan Mode. Press pushbuttons 1 and 2 simultaneously for 2
seconds to start Auto Scan Mode.
Press pushbuttons 3 and 4 simultaneously for
2 seconds to perform a keyboard and mouse
reset. Press pushbuttons 3 and 4 simultaneously for 2
seconds to perform a keyboard and mouse reset.
(GCS1804 only)