The firmware upgrade utility – IOGear GCS1802 User Manual
Page 41
41
The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides an automated process for
upgrading the KVM switch’s fi rmware. New fi rmware upgrade packages are posted on our web site as
they become available. Check the web site regularly to fi nd the latest packages: http://www.iogear.com
To prepare for the fi rmware upgrade, do the following:
From a computer that is not part of the KVM installation go to our Internet support site and choose
1.
the model name of your device (GCS1802) to get a list of available Firmware Upgrade Packages.
Note. The GCS1802 and GCS1804 share the same fi rmware.
Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it
2.
to your computer.
The Firmware Upgrade Utility