IBM EP-8KTA - Manual (Page 45)

BIOS
EP-8KTA
Page 4-19
Reset Configuration Data: This setting allows you to clear ESCD data.
The default is Disabled
Disabled: Normal Setting.
Enabled: If you have plugged in some Legacy cards to the system and they were
recorded into ESCD (Extended System Configuration Data), you can
set this field to Enabled in order to clear ESCD.
PCI/VGA Palette Snoop: Leave this field at Disabled.
The choice: Enabled, Disabled.
Assign IRQ For USB: This item allows BIOS to assign whether IRQ is with USB
or not. If you have not connect the USB device. Can release the IRQ for other
device. The default is Enabled.
Enabled: Provides IRQ for USB device.
Disabled: Release IRQ for other device.
Slot 1 to Slot 5 Use IRQ No: These settings allow the user to specify what IRQ
will be assigned to PCI devices in the chosen slot. Options available: Auto,3,4,5,
7,9,10,11,12,14 & 15. The defaults are Auto.