IBM EP-8KTA - Manual (Page 11)

Features EP-8KTA
Page 2-1
Section 2
FEATURES
EP-8KTA Features:
• EP-8KTA is based on the AMD Socket A Processors operating at 600
~ 1GHz on Socket A.
• Designed with VIA KT133 AGPset.
• Supports up to 768MB of DRAM (minimum of 32 MB) on board (please
see Section 3-2).
• EP-8KTA will support Error Checking and Correcting (ECC) when using
parity SDRAM memory modules. This will detect multiple bit errors and
correct 1-bit memory errors.
• Supports (1) 16 bit ISA slots, (6) 32 bit PCI slots, (1) 4X AGP slot and
provides (2) independent high performance PCI IDE interfaces capable of
supporting PIO Mode 3/4 and Ultra DMA 33/66 devices.
The EP-8KTA supports (6) PCI Bus Master slots and a jumperless PCI
INT# control scheme which reduces configuration confusion when plug
ging in PCI card(s).
• Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary
IDE interfaces.
• Designed with on chip Multi I/O: (1) floppy port, (1) parallel port (EPP,
ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese “Floppy 3 mode” is also supported
• Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released.
• EP-8KTA utilizes a Lithium battery which provides environmental
protection and longer battery life.