Impex TSA-5682 - Manual (Page 11)

STEP 5 (See Diagram 5)
A.) Insert a M12 x 5 ½” Hex Bolt (#39) through the Right Butterfly (#10). Secure the Bolt
with a M12 Regular Nut (#53). Insert the Bolt through the hole on the Right Upright
Beam and secure it with a M12 Knob (#45).
B.) Insert a Butterfly Handle (#15) through the hole on the Right Butterfly from the rear.
Push a Ø 2 ¾” Foam Roll (#22) onto the Handle.
C.) Attach a Spring Clip (#24) to the weight post on the Butterfly.
D.) Repeat Procedures A, B & C above to install the Left Butterfly (#9).
DIAGRAM 5
10