Intel 8S651M-RZ - Manual (Page 26)

- 26 - 8S651M-RZ Series Motherboard
English
Integrated Peripherals
IDE1 Conductor Cable
Auto Will be automatically detected by BIOS.(Default Value)
ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please m ake sure your IDE
device and cable is compatible with ATA66/100/133).
ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is com patible with ATA33).
IDE2 Conductor Cable
Auto Will be automatically detected by BIOS. (Default Value)
ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133 (Please m ake sure your IDE
device and cable is compatible with ATA66/100/133).
ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is com patible with ATA33).
On-Chip Primary PCI IDE
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
AC97 Audio
Enabled Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
IDE1 Conductor Cable [Auto]
IDE2 Conductor Cable [Auto]
On-Chip Primary PCI IDE [Enabled]
On-Chip Secondary PCI IDE [Enabled]
AC97 Audio [Enabled]
Onboard LAN Device (*) [Enabled]
System Share Memory Size [32MB]
USB Controller [Enabled]
USB Legacy Support [Disabled]
Init Display First [AGP]
Onboard Serial Port A [3F8/IRQ4]
Onboard Serial Port B [2F8/IRQ3]
Serial Port B Mode [Normal]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ECP]
x EPP Mode Select EPP1.7
ECP Mode Use DMA [3]
Game Port Address [201]
Midi Port Address [330]
Midi Port IRQ [10]
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
Item Help
Menu Level
u
[Auto]
Auto-detect IDE cable type
[ATA66/100/133]
Set Conductor cable to
ATA66/100/133
(80-pins)
[ATA33]
Set Conductor cable to
ATA33(40-pins)
"*" For 8S651M-RZ only.