Removing a pci express x16 graphics card, R (figure 19, a) and, Figure 19 – Intel DH55HC User Manual

Page 42

Text mode
Original mode

Intel Desktop Board DH55HC Product Guide

4. Connect a monitor to the graphics card according to the manufacturer’s

instructions.

Figure 19. Installing a PCI Express x16 Graphics Card

Removing a PCI Express x16 Graphics Card

Follow these instructions to remove a PCI Express x16 graphics card from a connector:
1. Observe the precautions in "Before You Begin" on page 27.
2. Disconnect the monitor cable from the graphics card back panel connector.
3. Remove the screw (Figure 20, A) that secures the card’s metal bracket to the

chassis back panel.

4. Push the card ejector lever down using the tip of a pencil or similar tool

(Figure 20, B) in the notch. This will release the card from the connector (C).

5. Pull the card straight up to remove it.