Impex SM-6200 - Manual (Page 25)

STEP 3 (See Diagram 3)
A.) Place the Seat Pad (#17) onto Seat Bracket (#5). Secure it with four M8 x 1 3/8” Allen Bolts
(#41) and Ø 5/8” Washers (#45).
B.) Attach the Backrest Board (#16) to the two Backrest Supports (#12). Secure it with four M8 x 1
3/8” Allen Bolts (#41) and Ø 5/8” Washers (#45).
C.) When adjusting the Backrest Board to an incline position, simply pull up the Board. When
adjusting the Board to a decline position, press or step down on the Backrest Adjustment Lever
(#9) to disengage the Lever to allow the Board to go down.
D.) Attach the Arm Curl Pad (#18) to the Arm Curl Stand (#7). Secure it with two M8 x 5/8” Allen
Bolts (#42) and two Ø 5/8” Washers (#45).
E.) Insert the Arm Curl Stand into the Leg Developer holder on the Main Frame (#1). Use the M18
Lock Knob (#27) to lock the Stand at desired position.
DIAGRAM 3
24