Set up, Plug in power cord, Connect humidifier (if so prescribed) ƽ warning – Invacare IRC5PO2V User Manual
Page 16
![background image](/manuals/127012/16/background.png)
SECTION 5—OPERATING INSTRUCTIONS
16
Set Up
Plug in Power Cord
Plug in power cord to an electrical outlet.
Connect Humidifier (If So Prescribed)
ƽ WARNING
DO NOT overfill humidifier.
DO NOT reverse the oxygen input and output connections.
Water from the humidifier bottle will travel through the
cannula back to the patient.
NOTE: For this procedure, refer to FIGURE 5.1, FIGURE 5.2 on
page 17, FIGURE 5.3 on page 18.
1. Remove cap from bottle.
2. Fill humidifier with distilled water to the level indicated
by the manufacturer. Replace the humidifier cap and
securely tighten.
FIGURE 5.1 Filling the Humidifier
3. Insert a flathead screwdriver in the plate groove on the top
edge of the filter access door and gently pry the filter
access door off (FIGURE 5.2).
4. Pull up and remove the humidifier bottle adapter
Humidifier
Bottle w/o Cap
Humidifier
Bottle with Cap