Replacing batteries in the remote control, Follow these steps to replace the batteries, Turn the remote face down in your hand – InFocus 760 User Manual
Page 39: Slide the battery cover off in the direction shown, Remove the old batteries, Install two new aaa alkaline batteries, Replace the battery cover
Maintenance
30
LitePro 760 User’s Guide
Bulb Guard
Your LitePro is equipped with a bulb life detection system called Bulb
Guard. When the operating bulb is near the end of its life or has
become degraded, Bulb Guard causes the lamp to blink. When this
happens, switch to the spare lamp. After you have finished your
presentation and the LitePro has cooled, replace the old lamp with a
new one.
Replacing Batteries in the Remote Control
Follow these steps to replace the batteries.
1. Turn the remote face down in your hand.
2. Slide the battery cover off in the direction shown.
3. Remove the old batteries.
4. Install two new AAA alkaline batteries.
5. Replace the battery cover.
+
-
-
+
Osprey.bk Page 30 Monday, December 11, 2000 1:38 PM