InFocus 760 - Manual (Page 31)

Using the LitePro 760
22 LitePro 760 User’s Guide
Technical Information
The left side of the menu contains information about the state of the
LitePro. If you need to call In Focus Technical Support for assistance,
they may need to know these values.
• Track
The current track setting. This value changes as you adjust the
Track bar. (Refer to “Track” on page 23 for more information
about tracking.)
• Horiz
The horizontal synchronization rate.
• Vert
The vertical synchronization rate.
• Mode
This value identifies the mode in which the LitePro is operating.
Menu Functions
Follow the instructions given above in “Using the Menu” to access
the menu and select the function you want to change.
Red
Adjusting the Red bar changes the amount of red in the projected
image. As you move the adjustment bar up, the colors turn
increasingly red. As you move the bar down, the colors turn
increasingly cyan (bright blue-green).
Pressing the brightness button on the remote changes the red, blue and
green values.
Green
Adjusting the Green bar changes the amount of green in the projected
image. As you move the adjustment bar up, the colors turn
increasingly green. As you move the bar down, the colors turn
increasingly magenta.
Blue
Adjusting the Blue bar changes the amount of blue in the projected
image. As you move the adjustment bar up, the colors turn
increasingly blue. As you move the bar down, the colors turn
increasingly yellow.
Osprey.bk Page 22 Monday, December 11, 2000 1:38 PM