beautypg.com

Attach the video-out cable to the powerbook, Tighten the thumb screws on all connectors, Turn on the computer – InFocus 760 User Manual

Page 23: Open the powerbook’s control panel, Click “mirroring, Restart the powerbook

background image

Connecting the LitePro 760

14

LitePro 760 User’s Guide

Connecting a Macintosh PowerBook

You’ll need an Apple PowerBook video-out cable to use the LitePro
with a PowerBook.

1. Attach the video-out cable to the PowerBook.

2. Attach one of the Mac adapters to the “Computer” end of the

LitePro cable. Attach the adapter (with the cable attached) to the
PowerBook’s video-out cable. Set the switch on the adapter to
“LoRes”.

3. Tighten the thumb screws on all connectors.

4. Turn on the LitePro 760 by pressing the “1” side of the power

switch. (Refer to “Powering Up the LitePro” on page 15.)

5. Turn on the computer.

6. Open the PowerBook’s Control Panel.

7. Click “Mirroring”.

8. Restart the PowerBook.

Osprey.bk Page 14 Monday, December 11, 2000 1:38 PM

See also other documents in the category InFocus Projectors: