InFocus 760 - Manual (Page 11)

Introduction
2 LitePro 760 User’s Guide
Compatibility
The LitePro 760 is compatible with a wide variety of computers
including:
• IBM-compatible desktop and laptop systems in VGA, SVGA,
XGA and VESA modes
• IBM PS/2 in VGA and MCGA modes.
• most Macintosh systems, including PowerBook, Mac II,
Performa, Quadra and PowerMac
• UNIX workstations
• X terminals
The LitePro 760 is not compatible with these systems:
• IBM-compatibles in CGA or EGA graphics mode
• Macintosh 128, 512, Plus, SE, SE/30 or Classic
• Macintosh Portable
Refer to the Appendix for a complete list of the systems that have
been tested with the LitePro 760.
Cables and Adapters
The LitePro 760 comes with these cables and adapters:
• LitePro cable, this Y-shaped cable connects the LitePro to your
computer and to your monitor. Its ends are labeled “LCD”,
“Monitor” and “Computer.”
• Two Macintosh adapters that attach to the “Monitor” and
“Computer” ends of the LitePro cable for Macintosh systems.
• Two 13W3 adapters that attach to the “Monitor” and “Computer”
ends of the LitePro cable for Sun, SGI, Intergraph or NeXT
workstations.
• Two BNC adapters that attach to the “Monitor” and “Computer”
ends of the LitePro cable for HP, DEC or IBM workstations and
Tektronix X terminals.
• Power cable.
Osprey.bk Page 2 Monday, December 11, 2000 1:38 PM