Insignia NS-F20TR - Manual (Page 25)

25
Insignia NS-F20TR 20" Flat Tube TV/DVD/VCR Combo
www.insignia-products.com
Searching on a DVD or CD
To search for a title on a DVD:
1 During playback, press the MODE button one
or more times until SEARCH appears.
2 Press the or button to select TITLE
SEARCH.
3 Use the number buttons to select the title you
want. If the DVD has more than ten titles, and
you want to select a one-digit title number,
press 0 then the number. Playback starts
automatically with the title you selected.
If you make a mistake, press the CLEAR
button and enter the number again.
4 Press the RETURN button to close the
search screen.
To search for a chapter on a DVD or track on
an audio CD:
1 During playback, press the MODE button one
or more times until SEARCH appears.
2 Within 60 seconds, use the number buttons
to select the chapter or track you want. If the
DVD or CD has more than ten chapters or
tracks and you want to select a one-digit
chapter or track number, press 0 then the
number. Playback starts automatically with
the chapter or track you selected.
If you make a mistake, press the CLEAR
button and enter the number again.
3 Press the RETURN button to close the menu.
To time search:
1 During playback, press the MODE button one
or more times until SEARCH appears.
2 Press the or button to select TIME
SEARCH .
3 Within 60 seconds, use the number buttons
to enter the amount to time you want to skip
on the disc. Playback starts automatically.
4 If you make a mistake, press the CLEAR
button and enter the number again.
5 Press the RETURN button to close the
search screen.
To search by markers:
1 During playback, press the MODE button one
or more times until SEARCH appears.
2 Press the or button to select MARKER
SEARCH .
3 Press the or button to select a marker
number from 1 to 10.
4 When the disc reaches the point you want to
mark, press the ENTER button. The chapter
or track number and elapsed time appear.
5 When you play the disc again, repeat Steps 1
through 3 to select a marker, then press the
ENTER button.
6 To erase a marker, select the marker
number, then press the CLEAR button. To
clear all markers, press the or button on
the list of markers to select AC
, then press
the ENTER button.
7 Press the RETURN button to close the
search screen.
Using zoom
You can enlarge the video image on DVDs.
To enlarge the video image:
1 During playback, press the MODE button one
or more times until ZOOM appears.
2 Press the ENTER button one or more times
to select the zoom size. You can select:
• ZOOM1 to enlarge the image by 1.3 times
the normal size.
• ZOOM2 to enlarge the image by 2 times
the normal size.
• ZOOM3 to enlarge the image by 4 times
the normal size.
3 Press the or button to move
through the zoomed image.
4 Press the RETURN button to exit zoom
mode.
Adjusting the black level
You can adjust the black level to make the black
parts of an image brighter.
To adjust the black level:
1 During playback, press the MODE button one
or more times until BLACK LEVEL appears.
2 Press the or button to select ON or
OFF.
3 Press the RETURN button to close the menu.
Note
You can also use the SKIP/REW or
FWD/SKIP button to search for a DVD chapter or
CD track.
Note
You can also clear all markers by:
•
Opening the disc tray
• Turning off your TV combo
• Pressing the INPUT button.
Note
• The zoom position guide appears in lower right
corner of the screen.
• Zoom does not work while the disc menu is
open.
• Zoom is not available on some discs.
• It may take several seconds to slide the
zoomed picture.
• The picture may be distorted if you operate
other functions, such as pause or fast forward
while in the zoom mode.
• To cancel zoom mode, repeat Step 1 and Step
2, and select OFF in step 2.
Note
Your TV combo saves this setting even if you turn
off your TV combo.