Intel XP-P5IM800GV - Manual (Page 23)

English
23
3.7. PC Health Status
ø This menu displays the current CPU temperature, the fan speeds, voltages etc.
n Current CPU / System Temperature
Automatically checks CPU & System temperature
n Current Voltage(V) Vcore / DDR25V / +3.3V / +5V / +12V
Automatically checks system voltage
n Current CPU / SYSTEM FAN Speed (RPM)
Automatically checks CPU/SYSTEM fan speed.
n CPU Smart FAN Control
Allows users to enable or disable the CPU Smart FAN Control function. (default:
Enabled) With this item set to enabled, CPU fan changes speed depending on CPU
temperature.
n CPU Smart FAN Mode
Allows users to set the CPU Smart FAN mode when CPU Smart FAN Control is set to
Enabled. (default: Auto)
Options: Auto (BIOS autochecks which type of CPU fan is installed and sets the
optimcal CPU Smart FAN control mode.)
Voltage (Set this item to Voltage if a 3-pin CPU fan is installed.)
PWM (Set this item to PWM if a 4-pin CPU fan is installed.)
Note: In fact, you can set the CPU Smart Fan Control mode to Voltage for either 3-
pin or 4-pin CPU fan. However, for those 4-pin CPU fans that are not
designed following Intel's 4-wire fans PWM control specifications, setting
the CPU Smart Fan Control mode to PWM may not effectively reduce the
CPU fan speed.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
PC Health Status
Current CPU Temperature 45°C
Current System Temperature 30°C
Vcore 1.78V
DDR25V 2.544V
+3.3V 3.36V
+5V 5.14V
+12V 11.84V
Current CPU FAN Speed 4440 RPM
Current SYSTEM FAN Speed 0 RPM
CPU Smart FAN Control [Enabled]
CPU Smart FAN Mode [Auto]
higf: Move
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level}