Intel XP-P5IM800GV - Manual (Page 21)

English
21
3.5. Power Management Setup
ø This is used to control the various power saving features of the PC.
n ACPI Suspend Type
Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/
POS (Power On Suspend) or S3/STR(Suspend To RAM) (default:S1/POS)
n Power LED in S1 state
Allows user to select the system LED status in the S1 (POS - Power On Suspend) state.
Options:
Blinking (LED will blink)
Dual/OFF (When selecting this, the LED will turn off for a single-colored LED
or change color for a dual-colored LED)(default:Blinking)
n Off by Power button
Controls whether the PC shuts off immediately after hitting the power button or delaying
a few seconds. (default:Instant-off)
Options: Instant-off (PC shuts off immediately)
Delay 4 Sec. (PC shuts off after a 4sec. delay)
n AC Back Function
Allows user to select system status when power is removed and returned.
Options: Memory (return prior to power removal)
Full-On (return to full system power)
Soft-Off (use of Soft PWR button to power on system)(default:Soft-Off)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Power Management Setup
ACPI Suspend Type [S1(POS)]
Power LED in S1 State [Blinking]
Off by Power button [Instant-Off]
AC Back Function [Soft-Off]
PME Event Wake Up [Enabled]
ModemRingOn/WakeOnLan [Enabled]
Resume by Alarm [Disabled]
x Date (of Month) Alarm Everyday
x Time (hh:mm:ss) Alarm 0 : 0 : 0
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level}
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
ECP (Extended Capabilities Port)
EPP1.9+ECP (both EPP and ECP)
EPP1.9+SPP (both EPP and SPP)
EPP1.7+ECP (both EPP and ECP)
EPP1.7+SPP (both EPP and SPP) (default:PRINTER)
n ECP Mode Use DMA
Allows the user to select the ECP Mode Use DMA
Options: 1, 3, Disabled (default:3)