Intel ENTERPRISE PRINTING SYSTEM (EPS) 4112 - Manual (Page 33)

- 33 - BIOS Setup
2-2 The Main Menu
Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use
arrow keys to move among the items and press to accept or enter a sub-menu.
(Sample BIOS Version: GA-945GCM-S2L E10)
Main Menu Help
The onscreen description of a highlighted setup option is displayed on the bottom line of the Main Menu.
Submenu Help
While in a submenu, press to display a help screen (General Help) of function keys available for
the menu. Press to exit the help screen. Help for each item is in the Item Help block on the right
side of the submenu.
BIOS Setup Program Function Keys
< >< >< >< > Move the selection bar to select an item
Execute command or enter the submenu
Main Menu: Exit the BIOS Setup program
Submenus: Exit current submenu
Increase the numeric value or make changes
Decrease the numeric value or make changes
Show descriptions of the function keys
Move cursor to the Item Help block on the right (submenus only)
Restore the previous BIOS settings for the current submenus
Load the Fail-Safe BIOS default settings for the current submenus
Load the Optimized BIOS default settings for the current submenus
Access the Q-Flash utility
Display system information
Save all the changes and exit the BIOS Setup program
•
If you do not find the settings you want in the Main Menu or a submenu, press +
to access more advanced options.
•
When the system is not stable as usual, select the Load Optimized Defaults item to set
your system to its defaults.
•
The BIOS Setup menus described in this chapter are for reference only and may differ by
BIOS version.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
`
Standard CMOS Features
`
Advanced BIOS Features
` Integrated Peripherals
` Power Management Setup
` PnP/PCI Configurations
` PC Health Status
`
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
ESC: Quit KLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Time, Date, Hard Disk Type...