MITSUBISHI ELECTRIC WD-62628 - Manual (Page 66)

66 Chapter 5. TV Menu Operations
Main Menu
Setup Menu
Figure 1
Use the Setup menu to select English or Spanish as
the language for the menus and on-screen displays.
Memorize the available channels for antennas or cable
connected to the ANT-1 and ANT-2 inputs. Manually
set the time for the TV, or select Auto and the TV will
automatically set the time based upon Extended Data
Service (XDS) time data. This time data is usually
broadcast by your local PBS station. This menu is also
used to set the TV timer, and reset the lamp reminder.
The TV’s software version is displayed on this screen.
Figure 1. Main menu, Setup selected
Channel Menu
Figure 4
Edit channels for ANT-1 and ANT-2. After memorization,
if a channel displays as digital and analog, you can
choose to see the channel digitally every time it is
selected. Manually add or delete channels from memory,
name channels or add your favorite channels to a SQV
(SuperQuickView™) list. Displays signal strength of
currently tuned digital channels.
Figure 4. Main menu, Channel selected
Captions Menu
Figure 5
Display Closed Captions if sent by the broadcaster,
select settings for analog or digital captions.
Figure 5. Main menu, Captions selected
V-Chip Lock Menu
Figure 6
Block or allow programing based upon rating signals sent
by the broadcast station, lock by time, or lock the front
panel buttons.
Figure 6. Main menu, V-Chip Lock selected
Audio/Video Menu
Figure 7
Reset the A/V Memory to return to the original factory
A/V settings for a selected device. Customize the
individual audio and video settings. Display a blue
screen when viewing a device with no signal, enable/
disable Film Mode, or turn the TV speakers on or off.
Figure 7. Main menu, Audio/Video selected
NetCommand Menu
Figure 2
Add, change, review or delete NetCommand® settings
and devices. Enable/disable TV Guide On Screen® or
change ZIP code and input selection settings. Change
the order of icons on the Device Selection menu. Turn
the transport menu off.
Figure 2. Main menu, NetCommand selected
Record Menu
Figure 3
Set up and view recordings and recording defaults. View
your customized Record List. If you have more than one
digital recording device connected, use this menu to
change the default digital Record To device. Set analog
recording size.
Figure 3. Main menu, Record selected