MITSUBISHI ELECTRIC MDT402S - Manual (Page 8)

1-8
English-7
English
Terminal Panel
1 AC IN connector
Connects with the supplied power cord.
2 RGB 1 IN (DVI-D)
To input digital RGB signals from a computer or HDTV
device having a digital RGB output.
* This connector does not support analog input.
3 RGB 2 IN (mini D-Sub 15 pin)
To input analog RGB signals from a personal computer or
other RGB equipment.
4 RGB 3 [R, G, B, H, V] (BNC)
IN connector: To input analog RGB signals or signals from
other RGB equipment.
5 RGB OUT connector (BNC)
To output the signal from RGB 3 IN connector.
6 DVD/HD connector (BNC)
Connecting equipment such as a DVD player, HDTV device,
or Laser disc player.
7 AUDIO IN 1,2,3
Input audio signal from external equipment such as a
computer, VCR or DVD player.
8 AUDIO OUT
Output the audio signal from the selected AUDIO IN source.
9 VIDEO INPUT/OUTPUT CONNECTOR
VIDEO IN connector (BNC and RCA): Input a composite
video signal. BNC and RCA are not available at the same
time. (Use only one input).
VIDEO OUT connector (BNC): Output the composite video
signal from the VIDEO IN source.
S-VIDEO IN connector (DIN 4 pin): Input the S-video (Y/C
separate signal). See page 26, S-VIDEO MODE SETTING.
10 EXTERNAL CONTROL (mini D-Sub 9 pin)
In connector: Input signal from control equipment such as
a computer or the output from a different MDT402S /
MDT461S.
Out connector: To connect multiple MDT402S / MDT461S.
11 EXTERNAL SPEAKER TERMINAL
Output the audio signal from the selected audio source.