MITSUBISHI ELECTRIC MDT402S - Manual (Page 26)

1-26
English-25
English
To compensate for image degradation, which is caused by
using a long cable.
RED/GREEN/BLUE DELAY
To adjust the each phase of RED, GREEN and BLUE
signal.
LEVEL: 0 - 6
RED/GREEN/BLUE SHARPNESS
To adjust the each performance degradation of RED,
GREEN and BLUE signal.
LEVEL: 0 - 45
SOG PEAK
To adjust the shape of Sync on Green signal.
Level: 0 - 1
VIDEO EQ (Input RGB 3 only)
To optimize the shape (Tailing) of RED, GREEN and
BLUE signal.
Level: 0 - 7
SYNC TERMINATE (Input RGB 3 only)
To select the terminate resistance for matching the cable
impedance.
HI: 2.2K ohm/LO:75 ohm
The OSD control menu will stay on as long as it is use.
In the OSD Turn Off submenu, you can select how long
the monitor waits after the last touch of a button to shut
off the OSD control menu. The preset choices are
10 -240 seconds.
Selects the information OSD display or not. The
information OSD will display when input signal or
source change or warning message like as no-signal or
out-of range.
A time between 3 to 10 seconds is available.
To select OFF TIMER mode ON/OFF.
In the OFF TIMER menu, you can preset the monitor to
automatically power down.
A time between 1 to 24 hours is available.
When the OFF TIMER is set, the SCHEDULE
(see page 28) settings will be disabled.
Selects the kind of DVI-D equipment which is connected
RGB1.
Select “DVI-PC” when PC or other computer equipment
is connected.
Select “DVI-HD” when DVD player, which has DVI-D
output, is connected.
Adjusts the position of the OSD menu.
Press + button to move right side of the screen.
Press - button to move left side of the screen.
Press
button to move up side of the screen.
Press button to move down side of the screen.
LONG CABLE MANUAL
RED DELY
GREEN DELAY
BLUE DELAY
RED SHARPNESS
GREEN SHARPNESS
BLUE SHARPNESS
SOG PEAK
VIDEO EQ.
SYNC TERMINATE
:SEL :RETURN MENU :EXIT MENU + -:ADJ
0
2
0
0
0
0
0
0
HI / LO
EXIT
:RETURN MENU :EXIT MENU
OFF TIMER
ON 1 HOUR
OFF
+ -:ADJ :SEL EXIT
CONFIGURATION 2
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSD TURN OFF
INFORMATION OSD
OFF TIMER
OSD POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
CONFIGURATION 2
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSD TURN OFF
INFORMATION OSD
OFF TIMER
OSD POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
+ -:ADJ :RETURN MENU :EXIT MENU
OSD TURN OFF
10 SEC.
EXIT
CONFIGURATION 2
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSD TURN OFF
INFORMATION OSD
OFF TIMER
OSD POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
:RETURN MENU :EXIT MENU
INFORMATION OSD
ON 10 SEC.
OFF
+ -:ADJ :SEL EXIT
CONFIGURATION 2
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSD TURN OFF
INFORMATION OSD
OFF TIMER
OSD POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
CONFIGURATION 2
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSD TURN OFF
INFORMATION OSD
OFF TIMER
OSD POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT :RETURN MENU :EXIT MENU
OSD POSITION
+ - :ADJ
RIGHT LEFT
UP
DOWN
EXIT
:RETURN MENU :EXIT MENU
DVI MODE
DVI-PC / DVI-HD
+ -:SEL EXIT
LONG CABLE
MANUAL
*:INPUT RGB2/3 only
OSD TURN OFF
INFORMATION OSD
OFF TIMER
DVI MODE
*:INPUT RGB1 only
OSD POSITION
CONFIGURATION 2
OSD TURN OFF
INFORMATION OSD
OFF TIMER
DVI MODE
OSD POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT