MITSUBISHI ELECTRIC MDT402S - Manual (Page 17)

1-17
English-16
LCD monitor
BNC x 3
DVI-D connector
Connecting your DVD player to your LCD monitor will enable you to display DVD video.
Refer your DVD player user’s manual for more information.
Connect the LCD Monitor to a DVD Player
• To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will
need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).
Some DVD player may have different connectors such as DVD/HD connector (Y, Cb/Pb and Cr/Pr).
Select [DVD/HD] input mode from the INPUT button.
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the
AUDIO INPUT button.
• Mode selection, see “DVI MODE” of page 25.
Connecting a DVD Player with component out
T
o
audio left output
RCA
BNC x 3 BNC-to-RCA adapter
To DVI output
T
o
audio r
ight output
To DVD Component video output