MITSUBISHI ELECTRIC MDT402S - Manual (Page 27)

1-27
English-26
Selects the method of input detection when more than
two computers are connected.
FIRST DETECT: When the current video input signal is
not present, then the monitor searches for a video signal
from the other video input port. If the video signal is
present in the other port, then the monitor switches the
video source input port to the new found video source
automatically. The monitor will not look for other video
signals while the current video source is present.
This function is available at input RGB 1/2/3.
LAST DETECT: When the monitor is displaying a signal
from the current source and a new secondary source is
supplied to the monitor, the monitor will automatically
switch to the new video source. When current video input
signal is not present, the monitor searches for a video
signal from the other video input port. If the video signal
is present in the other port, then the monitor switches the
video source input port to the new found video source
automatically.
This function is available at input RGB 1/2/3.
VIDEO DETECT: DVD/HD or VIDEO inputs will have
priority over RGB1/2/3. When DVD/HD or VIDEO input
signal is present the monitor will change and keep to the
DVD/HD or VIDEO input.
NOTE: The monitor will not search the other video input
port.
Indicates the model and serial number of your monitor.
INPUT DETECT
MONITOR
INFORMATION
Main-Menu
ADVANCED OPTION
Sub-Menu
Selects the S-Video input port function.
PRIORITY:
If cable is connected to the S-Video input, it will have
priority over the composite input port.
SEPARATE:
S-video port and Composite port are selectable as
independent input port.
Selects to decision of input signal about below timings,
1024x768, 1280x768 and 1360x768.
AUTO: Determines the resolution automatically.
1024x768: Determines the resolution as 1024x768
1280x768: Determines the resolution as 1280x768
1360x768: Determines the resolution as 1360x768
Selects a level of black expansion.
In case of go under the black cut-off level, please adjust
the “Black level” in moderation on OSD menu.
Selects a display gamma.
1: 2.2
2: 2.4
3: S gamma
4: Native
NOTE: sRGB picture mode is standard and cannot be
changed.
INPUT RESOLUTION
*:INPUT RGB2/3 only
BLACK LEVEL
EXPANSION
*:INPUT VIDEO only
GAMMA SELECTION
MAIN MENU
PICTURE
SCREEN
AUDIO
PIP
CONFIGURATION 1
CONFIGURATION 2
ADVANCED OPTION
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
ADVANCED OPTION
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
:RETURN MENU :EXIT MENU
BLACK LEVEL EXPANSION
HIGH / MIDDLE / OFF
+ -:SEL EXIT
ADVANCED OPTION
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
:EXIT MENU :RETURN MENU
GAMMA SELECTION
2. 2
2. 4
S GAMMA
NATIVE
:SEL EXIT :EXIT MENU
:RETURN MENU :EXIT MENU
INPUT RESOLUTION
:SEL
AUTO
1024 X 768
1280 X 768
1360 X 768
EXIT
CONFIGURATION 2
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSD TURN OFF
INFORMATION OSD
OFF TIMER
OSD POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
:RETURN MENU :EXIT MENU
INPUT DETECT
FIRST
LAST
VIDEO
NONE
DETECT
DETECT
DETECT
:SEL EXIT
:RETURN MENU :EXIT MENU
MONITOR INFORMATION
MODEL NAME:
MDT4XXS
SERIAL:
12315XXX
EXIT
CONFIGURATION 2
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSD TURN OFF
INFORMATION OSD
OFF TIMER
OSD POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
S-VIDEO MODE
:RETURN MENU :EXIT MENU
S-VIDEO MODE
PRIORITY / SEPARATE
+ -:SEL EXIT
ADVANCED OPTION
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT
ADVANCED OPTION
S-VIDEO MODE
INPUT RESOLUTION
GAMMA SELECTION
IMAGE FLIP
MONITOR ID
TILING
HEAT PROTECT
:SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT