Metz 40 TK 81 - Manual (Page 27)

27
Picture-in-picture
The picture-in-picture (PIP) function permits you to display a video picture in a small window while displaying
signals from a PC.
• The menu item "Picture-in-picture" can be found in the menu INPUTS > SOURCE > PC(DVI) / PC(RGB) and is
used to select the source of the picture in the small window. The PIP key is used to activate the function.
☞
Press the PIP key to display the picture from the input selected under DISPLAY > PICTURE-IN-PICTURE >
SOURCE (such as the tuner) in a window within the currently displayed picture.
• If there is no signal connected to the selected input, a dark window is displayed in the current picture.
• You can change the size and position of the window by repeatedly pressing the PIP key.
Automatic power-off
You can set the TFT monitor so that it switches itself off after a certain time.
☞
Select one of the pre-defined times in the menu item POWER-OFF TIME.
• The TFT monitor will switch itself off automatically after this time.
Switching between dual-language channels and between MONO and STEREO
Dual-language sound is the term for the method used to transmit films with a synchronised sound channel and the
original sound channel. The viewers can then select which of these they want to hear.
When a dual-language programme is received, sound channel A is initially active.
☞
To switch to channel B, press the M/S key.
When receiving a MONO programme, you can switch from MONO to PSEUDO-STEREO.
When receiving a STEREO programme, you can switch from STEREO to STEREO WIDE.
Off / 0:30 / 1:00 / 1:30 / 2:00 / 2:30
TUNER: 2 ZDF
Mono
TUNER: 2 ZDF
Pseudo Stereo
Press the M/S key
TUNER: 2 ZDF
Stereo
TUNER: 2 ZDF
Stereo wide
Press the M/S key
Tuner
SCART1
SCART2
YC
FBAS