Metz 40 TK 81 - Manual (Page 24)

24
Teletext
There are three types of Teletext information which can be received with the TFT monitor:
FLOF (Fasttext), TOP-Text and Level 1.5.
• Select a station which transmits Teletext.
• Press the TEXT key on the remote control to display the Teletext information.
• Use the numeric keys for direct selection of the desired Teletext pages.
• Depending on the type of Teletext being received, the red, green, yellow and blue keys have different functions.
These functions are shown at the bottom of the Teletext window.
• To close the Teletext window, press the TEXT key on the remote control again.
Displaying Teletext subpages
Subpages are the individual pages of a multiple Teletext page.
• Select the desired Teletext page (e.g. ARD Teletext, Page 743).
• Press the -/-- key
ታ.
• Enter a four-digit number (e.g. 0004) to select the desired subpage.
• If the desired subpage is not displayed within a short period, press the MENU key to return to the
TV programme.
• When the desired subpage has been found, its number is displayed at the top left corner of the screen.
• To display the selected page, press the MENU key again.
5.5 PC Mode
• Ensure that the TFT monitor and the PC are both switched off.
• Connect your PC to the TFT monitor with the enclosed video cable, inserting the DVI plug into the monitor and
the HD-Sub plug into the PC.
• Switch on the TFT monitor and the PC.
• In the menu item "INPUTS-> SOURCE", you can select the appropriate input signal from the PC:
a) analogue RGB-Signal: select PC(RGB)
b) digital DVI signal: select PC(DVI)
When the TFT monitor is switched on, it automatically detects the picture format which is set on the PC. This infor-
mation is shown in an Info window.
RGB-1024 x 768
Fullscreen