Metz 40 TK 81 - Manual (Page 26)

26
5.7 Special Functions
Manual station search
1. Press the TV key to switch on the monitor and press the MENU key.
2. Use the cursor key
̈ to open the sub-menu "Inputs".
3. Use the cursor key ̄ to select the sub-menu "Settings" and press the ̈ key to open it.
4. Use the cursor key ̄ to select the sub-menu "Manual search" and press the ̈ key to open it.
5. Use the cursor key ̈ to open the settings for the "Manual search".
6. Select the programme position:
Use the cursor key ̄ to select the desired programme position and press the ̈ key to activate it. Alternatively,
enter the number of the desired programme position with the numeric keys.
7. Select the TV standard:
If necessary, use the cursor keys ̈ and ̄ to select the TV standard and press the ̇ key to confirm your selection.
8. Frequency: Use the cursor key ̄ to select the frequency and press the ̈ key to activate it. Alternatively, enter
the desired frequency with the numeric keys.
9. Name: You can enter a name for the programme position. To do this, use the cursor key ̄ to select "Name"
and press the ̈ key to activate it. Use the ̄ key to select the desired character and press the ̈ key to move to
the next position. When you are finished, press ̇ ̈ to accept the input.
10. Press the MENU key to exit from the manual search.
11. You can display the station table by pressing the white key on the remote control.
Colour temperature
You can select one of three pre-defined colour temperatures or use the menu item COLOUR TEMPERATURE >
USER to define your own value.
A lower colour-temperature value increases the red component of the picture and makes it look "warmer". Higher
values increase the blue component of the picture and make it look "colder".
Freeze frame
You can freeze on the current frame by pressing the II key or with the menu item FREEZE FRAME.
User