Metz 40 TK 81 - Manual (Page 15)

15
• Satellite receiver
☞
Switch on your satellite receiver and press the AV key on the remote
control to switch on the monitor. Note that you may have to press the
AV
key several times, depending on the SCART socket to which your
receiver is connected.
• PC
☞
Switch on the monitor by pressing the PC key on the remote control
and then select the appropriate signal input ( PC(RGB) or PC(DVI)).
To do this, press the MENU key on the remote control to open the TV
menu of the monitor and select the desired input signal in the sub-
menu INPUTS > SOURCE.
4.4 Using the TV Menu
You can set up and operate your TFT monitor with the aid of the simple menu control system. This is done with six
keys on the remote control:
ቢ
M key
Saves any changes you have made.
ባ
P ̆ - key
Moves upwards in the TV menu. The selected sub-menu or function is marked with a different coloured
background. If functions are displayed as values or bars, you can increase the value with this key.
ቤ
P ̇ - key
Back to the previous menu. Exit from the currently selected sub-menu or function.
ብ
MENU - key
Opens the TV menu. The main menu is displayed at the top left corner of the screen. Pressing the MENU key
again closes the TV menu.
ቦ
P ̈ - key
Activates the selected sub-menu or function. The selected menu item is displayed on a green background and
can be changed.
ቧ
P ̄ - key
Moves downwards in the TV menu. The selected sub-menu or function is marked with a different coloured
background. If functions are displayed as values or bars, you can decrease the value with this key.
Saving changes
Any changes you have made in the TV menu are saved by pressing the M key on the remote control (see picture
above) or by closing the TV menu.
Ǽ
RK 14
T V AV P C
– / – – F M / S
Ǽ
RK 14
T V AV P C
– / – – F M / S
M
ቢ
ባ
ቤ
ብ
ቦ
ቧ