Magellan GPS Tracker - Manual (Page 39)

Magellan GPS Tracker 29
Using the Time Screen
The TIME screen displays the current time,
estimated time enroute (ETE), time of arrival
and elapsed time in regards to the route you
are navigating in. The first data field can be
customized to correct the current time and to
select the time format.
Resetting the Trip Odometer
You may want to reset the Trip field to zero.
While viewing the SPEED screen, press MENU, highlight TRIP RESET
and press ENTER. A pop-up window will appear. Highlight YES or
NO and press ENTER.
Setting the Speed Average
You may want to reset the Speed Average field in your receiver. You can
choose from TRIP, 5, 30 seconds, 1, 5 minutes or 1 hour.
While viewing the SPEED screen, press
MENU, highlight SPEED AVG and press
ENTER. A pop-up window will appear.
Highlight the desired time frame over which
averaging will be performed and press
ENTER.
The default is 30 seconds.
SPEED AVG
TRIP
5 SECONDS
30 SECONDS
1 MINUTE
5 MINUTES
1 HOUR
03:54:21
01:09:24
02:24:56
04:34:20
P
M
P
M
ELAPSED
ETE
TIME
OF ARRIVAL